21 Pro Maintenance Tips For Pole Saws
If you have a yard filled with trees or function as a professional gardener or forester, then you know just how useful a pole saw can be. While chainsaws are useful for felling trees and clearing thick brush, they're too dangerous for cutting limbs and branches that are positioned above the shoulder or head level. For that, you're going to have to use a pole saw. The instrument is ideal for pruning trees to your own specification and cutting down branches which may pose a hazard for people.
A pole saw is essentially a modified chainsaw: the bar and chain are attached to a pole or extended tubular shaft. Because the shaft allows the user greater reach, pole saws are perfect for limbing and trimming small branches. And much like a chainsaw, a pole saw can be incredibly dangerous in the hands of the inexperienced.
When you're looking around for a pole saw on the internet, you might discover that they're either petrol-powered or electric. Each version has its own benefits and disadvantages, which means you have to discover your needs so that you may properly choose the right pole saw for you.
Whether you are using a petrol or electric pole saw, the tool requires regular maintenance to keep it in top condition. Machines are like people, they need to be cared for to ensure a wholesome state and optimum performance. Neglect the pole saw, and it will break down when you need it. Regular service is vital to lengthen the service life and dependability of the pole saw.
The following is a guide to maintaining your pole saw you are able to cut branches and limbs for years to come.
Before and after use
Wash the body, bar and chain of the pole saw using a damp cloth. Make sure that all wood chippings, sawdust and dirt have been wiped off.
Assess whether the trigger lock is functioning well. The chain should not turn if the cause lock is engaged. Do not use the pole saw if it does.
Double check if the stop switch turns off the pole saw if engaged.
Ensure the chain isn't turning while the pole saw is in idle mode.
Clean the air filter each after use. If it's still too dirty or obstructed after cleansing, replace it.
Inspect the body and see to it that all bolts and screws are properly tightened.
If you are using a petrol pole saw, make certain there are no leaks prior to use.
Don't forget to clean under the protective cap. There might be dirt trapped inside that may transfer to the pole saw.
See if the return spring, starter cord and starter are in good condition. Send the pole saw for a fix if any of the three are worn or broken.
Lengthy exposure to vibration can result in long-term nerve damage. Always be certain that the vibration dampeners are functional rather than worn down.
Wash the area surrounding the spark plug. Remove the plug and see if the plug gap and electrodes are in good condition. Replace the spark plug when required.
The cooling fins on the flywheel have to be cleaned as dust and gunk tend to build up within the mechanics.
To get mufflers without a catalytic converter, remember to clean or replace the spark arrestor screen.
Do an overall inspection and cleanup of this area surrounding the carburettor.
Drain the gas tank and clean its insides.
Don't forget to clean the carburettor. If needed, have a certified technician perform the cleanup.
Perform a thorough cleanup of the fan wheels.
Make sure that the fuel pipe and filter aren't worn down. Replace the parts if needed.
The clutch and its components are certain to get worn down after a month of usage. Check the condition and seriousness of the decay, and replace if needed.
Replace the spark plug.
To get mufflers using a catalytic converter, do not neglect to clean and check the condition of the spark arrestor screen.