Chips In Windshield How It Happens, When To Repair, How To Repair
How many times has it happened to you that a small stone or rock hit the windscreen of your car and caused a little nick to occur on the surface of the screen? These nicks or small damages are known as chips. Normally, the chips occur when the certain debris from the tires of different cars fling out and hit the windscreen of a car.
Repair the Chips As Soon As Possible
The nicks or chips may often lead to other major cracks as well. It will be a good idea to opt for a cracked windscreen repair Auckland during these times. Most people are able to identify certain chips as they make a popping sound when they occur. However minor the damage may seem from a chip, it is essential to get the repair done immediately. If debris or dirt gets stuck on the chips, then repairing the windshield becomes an impossible feat sometimes.
How do you think the dirt particles and debris get stuck on the windshield chips? Well, because of certain weather conditions and windshield wipers as well. Also, the windshield wiper fluid, containing several dyes can provide a discoloration to the area. In such cases, a repair in the windshield won't be as effective and smooth as it is supposed to be.
For getting the best possible repair done, the entire process of repairing should be done within just a few days of the damage. Only then you will have a proper and smooth cleaning of the windshield. If not repaired on time, the chips in the windshield may turn even worse and grow into cracks as well. Repairing the windshield cracks can be a different problem altogether. So, the best bet here would be to repair the windshield chips as soon as they occur to avoid other expenses.
It so happens most of the times that the chip in the windshield occurs beside the edge. This can be a dangerous situation as once the crack gets a bit closer to the car's edge, the repair becomes impossible.
Procedure for Repairing the Windshield Chips
The entire process of a cracked windscreen repair Auckland has many different steps and is performed by the technicians who have the required knowledge about the different aspects of windshield repair.
The entire process is quite simple and quick. For the first step, the technician does an inspection of the windshield to determine the certain type of repair that can be deemed perfect for the crack repair. This step involves the inspection of the type and the size of the chip.
The next step involves the cleaning of the chip area and making sure that no debris or moisture is stuck in the chip area. This is an important step as the presence of dirt or debris may cause the repaired spot to look abit cloudy.
Further, the chip is them sealed with the help of a certain resin-type material. Ultraviolet light is used to harden the material and the excess resin is removes to reveal a repaired windshield.