Floor Sanding And Restoration Services You Can Count On

Floor Sanding And Restoration Services You Can Count On

DIY floor sanding puts your investment at risk. Given that the average tongue and groove wood flooring ranges at 19 mm thick, you don't have much room for making mistakes. The sanding can only be done for about 5mm, so you need to get it right otherwise the structural integrity of the floor will be on the line. Mistakes are common during the DIY floor sanding projects. For instance, the drum being in contact with the floor when the unit is being turned on or off. When this happens, even for a split second, the drum spins on one spot, and creates a divot. From scratches to drum marks and chatter marks, any mistake will be highlighted when the finishing is complete. By then it will be too late, and the only recourse is to start all over again. There's also the aspect of efficiency. Professionals employ industrial sanding equipment. It's of superior quality and balance compared to the gear that is available for rent from dealer shops. With a reduced capacity and power ratings, this means that right from the onset you will already be at a disadvantage. The DIY job ends up taking much longer than had been planned for. A day job can even span over an entire week. All through this time, the floor will be out of commission, and you've not even got to the stage of applying the finish coats. Then there's the dust. Copious amounts will be generated as the old finish is sanded off the floor. Without proper dust control mechanisms, it will wind up in your building's air conditioning and plumbing systems, covering your walls and cabinets, getting into the sockets and coating your lighting apparatus, and filling the indoor air space with light and harmful particles. You don't want to undergo these inconveniences and still risk ending up with low quality results. Get a quality job done by hiring the dustless floor sanding professionals.

Why You Should Use Professional Services

You want quality results. The existing coats of polish need to sufficiently removed before new ones are applied. The very structure of floor finishes is formulated to withstand attacks and abrasion, hence loads of power are needed to get rid of the existing finish. The equipment that our personnel uses packs that in spades. High-powered sanders makes light of the work, grinding away layers upon layers of finish coats with ease, sanding through to the bare wood. The pores of the wood surface are opened up, preparing them for the floor treatment products, and the surface is smoothened to ensure that the application of the finish that is to follow is done uniformly. Powerful vacuum systems are attached to the sanders by hoses, and these pick up the dust that is generated and transfer it to containment units off your property. This dustless floor sanding system ensures that your interior space is not covered with the invasive dust that's produced during the process, protecting the persons in the establishment and enabling you avoid the hassle of the cleaning that would have been required. This set of powerful gear is handled by a qualified team. Our personnel have both the training and experience needed to handle the diverse floor are needs in both residential and commercial establishments. They will apply the most appropriate processes on your installation, ensuring that you get quality result without putting it at risk.